LAARS 2400-135 Burner

LAARS 2400-138 Ignitor

LAARS 2400-139 Control Board

LAARS 2400-151 Field Service Kit

LAARS 2400-386 Pump

LAARS 2400-388 Bronze Pump

Teledyne Laars 2400-574 Pressure Gauge (0-75 psi)

LAARS 2400-133 Blower

LAARS 2400-136 Combustion Coil

Teledyne Laars 2400-402 Exhaust Manifold Assy

LAARS 2400-137 Gasket Kit

Laars 10-332 Ignitor Gasket, CB/HWG

The igniter is a “glow bar” type silicon carbide unit. It is
energized whenever there is a call for heat and the red
"IGNITER" light on the boiler control is lit. After the igniter is
switched off and the boiler continues to run, the igniter functions
as a flame sensor for the boiler control.
If the ignitor fails and must be replaced, always install a new
igniter gasket with the replacement igniter.
CAUTION: Ignitor gets hot.

Teledyne Laars E2078100 Wire Harness, Summit Blower

Teledyne Laars S2101300 Gaskets and Screws, Venturi

Teledyne Laars S2100200 Venturi Manifold, 0-70C

Laars 2400-150 Pressure Gauge, 300 PSI, SMW, Summit

Laars 2400-316 Pressure Relief Valve, 50 PSI, SMB, Summit

Teledyne Laars 10-223 Brass Ring Assy.

Laars 10-354 Wire Harness, HWG, CB-M2, Heatmaker

Laars 10-226 O Ring #144

Laars 10-224 O Ring #35

10-220  SPRING

10-222  BRASS RING

Laars 10-217 THERMOSTAT 140 F, DRILLED

Laars 10-218 THERMOSTAT 140 DEGREE F

LAARS E2220200 Transformer

10-213  MIXING VALVE BODY 1 1/4

10-215  MIXING VALVE COVER 1 1/4

10-216  BOLT,5/16-18x3/4 HEX HDSS

10-052  MANIFOLD GASKET

10-390 GRID SCREEN,VENTING,3"DIA

10-396 COUPLING, HUBLESS 3 in.

10-398 BUSHING,TRANSITION,3x2cu

Laars 10-384 WALL FLANGE PIERCED

Laars 10-391 GRID SCREEN,VENTING,4"DIA

Laars 2400-110 Stack Switch

10-267  INTAKE/ EXHAUST TCO

BLOWER BRACKET FORMED

10-066  LOCKNUT, 2-12, UN - 2A

10-078  ECONO COIL ASSY

10-100  BOILER SEAL 1/4 FIBER

10-110  WASHER, VAPOR SEAL

10-135  GASKET EXHAUST

10-136  DRAIN SEAL NEOPRENE .951

10-138  DRAIN SEAL WASHER